Simple design enhances your car's exterior look
Super bright, Faster on/off Response Time for Driving Safety
Direct Plug & Play, Usually in 15 minutes or less, No Modifications Required
Durable Black ABS Housing
Light Color: Amber
Lens: Available in Clear & Smoke
Color Temperature: 2000K
Material: Durable Black ABS Housing
Operating Voltage: 12V DC
Housing : Made of High Quality Light-Weight ABS Plastic
One Pair of Xprite LED Turn Signal Light Assembly For Jeep Wrangler JK JKU 2007-2017
13 Reviews Hide Reviews Show Reviews
Easy install but they arent bright unless the turn signal is on. And 1 of them keeps going out. Only 1 week old.
These things are great. Super bright too.
I just put these smoke turn signals on my 2015 JKU rubicon. It took less than 10 minutes! I'm so impressed with these lights! All the wiring and voltage reduction is done for you, plug and play. Awesome totally reccomend
Everything looks great, only problem was it didn't arrive on time :(
This review is for the Xprite front turn signal and side marker lights that came in a dual package. The two sets of lights came in one package and I found nothing wrong with the manufacturing or packaging. The one drawback is that there are no instructions. While they are just lights, I did end up searching for a YouTube video on help with installing both sets of lights. The side markers will require that you remove the first two plastic pins holding the inner fender to the outer fender so you can create enough space to remove the old side marker and insert the new one. The lamp will need to be out from the old one to get it removed and the back harness will need to be removed to insert the new LED. There just physically isn't much clearance. Once you have done that you will need to find new plastic clips to hold the inner and outer fenders together. I just installed the lights today and will plan on going to the auto parts store tomorrow to find the clips that I need. As for the turn signals, they are much easier to install. I removed the wiring harness and lamp from the old assembly, then figured out which clips that held it in that needed to be held together to remove the old light assembly. Then the new LED assembly snaps in from the front of the grill and the wiring harness plugs right back in. Very simple, but I did it with poor lighting and didn't bother to grab a flashlight. A flashlight helps...you won't need any other tools though as it is rather simple. Maybe a screwdriver if you have a stubborn clip holding the lamp assembly in. Both lights work well and flash as they should. I had read other reviews of the LED's not being aligned the same per pair. This is not true with this kit and all of the diodes appear to be symmetrical. No flashing issues either. I tried them with both hazard lights on and blinkers on with the parking lights on and off. No issues and they look great. Can't really say they are that much brighter than stock, but they look cool and you know they are LED because you can see each diode lit up. So far so good....will see if they hold up to the road for a few months and report back.
Easy install and looks great!
Great, plug & play. Seem to be well made and look great on my Jeep!