Material: Casting Aluminum Alloy Housing. The suitable design for heating elimination
Lumen Flux: 19200 Lm, Shakeproof, rustproof, water proof (IP67), high/low temperature resistance
LED Power: 288W (96pcs x 3w High intensity CREE LEDs). Very Low Power Consumption, Heavy-duty LED bulbs, High energy efficiency & stability: 50,000+hours life
Size: 44" x 2.5" x 3.25" (without bracket); 44" x 2.5" x 3.8" (with bracket)
LED Power: 288W (96pcs x 3w High intensity CREE LEDs)
Beam type: Central Light: SPOT 30 degree & FLOOD 30 degree
Operating Voltage:9-30V DC
Lumen Flux: 19200 Lm
Waterproof rate: IP 67
Color Temperature: 6000K
Working Temperature:-45 ~+85°C
Material: Diecast aluminum alloy housing
Mounting Bracket: Stainless Steel
Dimensions: 44" x 2.5" x 3.25" (without bracket); 44" x 2.5" x 3.8" (with bracket)
Lifespan: 50,000 Hours
1 x Xprite C3 Series Off Road 44" 288W 96 LEDs Spot & Flood Combo Beam Waterproof Work Light Bar
11 Reviews Hide Reviews Show Reviews
This light bar is great, I have had it almost a year now and no trouble. I have it installed on a Honda foreman. It only took about 45 minutes to setup and wire it. You will need to buy a wiring kit for it because it doesn't have one. This light bar is super bright and sturdy. I will buy from this company again when I need another light bar. I have never had problems with it getting wet or muddy.
Over all good product however no spacers included for over head mounting and a bit of flickering when turned on. Not sure the issue as it seems to have gone away for the moment. Will be keeping an eye on it to see if it returns. Great value and good looking light bar packaged very well.
For an 15in bar the light is bright
Let's be honest for the price your expecting more of a show light, not a go light. That's what I thought too. Boy was I wrong. It fit to my factory drilled holes in my bull bar perfectly and let me tell you, it's much brighter than i expected. As a volunteer firefighter I'll be using this as scene lighting for when I go direct to calls at night.included in my review are some pictures of the light itself, and my truck at night with the light on and off. I hope I am of some help to you. When buying this is the kind of review that I wanted to see.
Great lighting option, easy to install. fit perfectly behind the grill of my 2011 F-150.
I would recommend this to anyone I most keep my teryx parked in garage so no big deal but this thing is bright as hell I can light up my neighborhood with this bar instant daylight must have for the trails
Good bright light for great price easy to install
I was very hesitant to purchase one of these, due to the brand name and low cost. But, I had to know if it might be a reasonable alternative to buying one for $1000.00 or more. Several reviews mentioned issues with condensation getting inside the housing, so when it arrived I applied black RTV gasket sealer (Permatex) to all the casing joints, the bolt holes (covered them completely), and around the glass. I did not disassemble it in anyway, I just used common sense, and put it on any spot that could possibly be where water or moisture might sneak in. I used thick rubber bushings between it and the mounting points as shock absorbers. After several weeks of extreme (very extreme- yes very extreme again) offroading, rain, and high humidity -so far, no moisture or condensation has been seen inside it. All LEDs still work great. It does as good as or better than some of my buddies' $600 and up light bars and I would definitely recommend it. I did invest a little time on the front end prior to installation but the outcome was great and well worth the hour I spent putting a little RTV on it. There are also a ton of YouTube vids on these types of bars with tips/tricks to prep them. I just ordered another one for another jeep I own. No idea if my prep work and use of bushings have anything to do with my experience, but it seemed to work for me.